Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: JUNIOR "M"

MANUFACTURED BY:
DANARM UK
STROUD, GLOUSTERSHIRE, ENGLAND
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1948
YEAR DISCONTINUED:
1949
ENGINE DISPLACEMENT:
98cc
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
50mm (2.0 in.)
PISTON STROKE:
50mm (2.0 in.)
CYLINDER TYPE:
Cast Iron
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
1.5
WEIGHT:
24.9kg (55 lbs.)
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Manual, two plate cork insert type
DRIVE TYPE:
Roller chain reduction
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Villiers flywheel type
CARBURETOR:
Villiers Junior type
MAJOR REPAIR KIT:
n/a
MINOR REPAIR KIT:
n/a
AIR FILTER SYSTEM:
Wire screen element
STARTER TYPE:
Rope
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
06.3mm (0.250 in.) before TDC
BREAKER POINT SETTING:
0.38mm (0.015 in.)
FLYWHEEL/COIL AIR GAP:
position is fixed
SPARK PLUG TYPE:
Lodge CB3
SPARK PLUG GAP:
0.025 in. (0.63mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
20:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Castrol XL
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
Orange enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:


Photographs courtesy Kenneth Hammant collection


 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2014 MIKE ACRES - All rights are reserved.